Bifacial Solar Panels
Bifacial solar panels are one of the new advanced technologies in the PV sector. The concept behind the bifacial solar panels is that the PV modules receive the incident solar rays on the front side as well as on the rear side of the panel to generate electricity. Therefore, the bifacial solar panels can exploit much more solar irradiance than the mono facial modules resulting in more power output.
Most of the bifacial solar panels can work with 20% more efficiency than the traditional solar panel but this supremacy is based on several factors such as the type of the solar system application, the tilt angle, row to row spacing, mounting height and the albedo.
Choose your Half Cell Solar Panels
295W-310W – AS-6M30-BET BIFACIAL
295W-315W – AS-6M30-CET/AS-6M30-CEW
355W-370W – AS-6M-BET BIFACIAL
430W-465W – AS-6M-BHC
355W-375W – AS-6M-CET/AS-6M-CEW
295W-310W – AS-6M30-BET BIFACIAL
Key Features
- More power gain up to 30% by utilizing the ambient light reflected from surrounding
surfaces. - Lower annual power degradation and higher energy yield during the module’s
lifetime. - High load-bearing capacity which can withstand wind loads up to 2400Pa and snow
loads up to 5400Pa. - Excellent reliability and durability against extreme environmental conditions (high
resistance to salt mist, ammonia, sand, acid and alkali, etc.). - Potential induced degradation (PID) free
- Positive power tolerance of 0 ~ +3 %.
Quality Certificates
- IEC61215, IEC61730, CE
- ISO9001:2008: Quality management system
- ISO14001:2004: Environmental management system
- OHSAS18001:2007: Occupational health and safety management system
Special Warranties
- 12 years limited product warranty.
- Limited linear power warranty: 30 years 82.5% of the nominal power output.
295W-315W – AS-6M30-CET/AS-6M30-CEW
Key Features
- High module conversion efficiency up to 19.15% by using high efficient solar cells
and advanced manufacturing technology. - Lower annual power degradation and higher energy yield during the module’s
lifetime. - High load-bearing capacity which can withstand wind loads up to 2400Pa and snow
loads up to 5400Pa. - Excellent reliability and durability against extreme environmental conditions (high
resistance to salt mist, ammonia, sand, acid and alkali, etc.). - Potential induced degradation (PID) free.
- Positive power tolerance of 0 ~ +3 %.
Quality Certificates
- IEC61215, IEC61730, CE
- ISO9001:2015: Quality management system
- ISO14001:2015: Environmental management system
- OHSAS18001:2007: Occupational health and safety management system
Special Warranties
- 12 years limited product warranty.
- Limited linear power warranty: 30 years 82.5% of the nominal power output
355W-370W – AS-6M-BET BIFACIAL
Key Features
- More power gain up to 30% by utilizing the ambient light reflected from surrounding
surfaces. - Low temperature coefficient and excellent performance under high temperature and
low light conditions. - High load-bearing capacity which can withstand wind loads up to 2400Pa and snow
loads up to 5400Pa. - Excellent reliability and durability against extreme environmental conditions (high
resistance to salt mist, ammonia, sand, acid and alkali, etc.). - Potential induced degradation (PID) free.
- Positive power tolerance of 0 ~ +3 %.
Quality Certificates
- IEC61215, IEC61730, CE
- ISO9001:2008: Quality management system
- ISO14001:2004: Environmental management system
- OHSAS18001:2007: Occupational health and safety management system
Special Warranties
- 12 years limited product warranty.
- Limited linear power warranty: 30 years 82.5% of the nominal power output.
430W-465W – AS-6M-BHC
Key Features
- More power gain up to 30% by utilizing the ambient light reflected from
surrounding surfaces. - Superior performance under high temperature and low light conditions.
- High load-bearing capacity which can withstand wind loads up to 2400Pa and snow
loads up to 5400Pa. - Excellent reliability and durability against extreme environmental
conditions (high resistance to salt mist, ammonia, sand, acid and alkali,
etc.). - Potential induced degradation (PID) free.
- Positive power tolerance of 0 ~ +3 %.
Quality Certificates
- IEC 61215, IEC 61730, CE
- ISO 9001:2015: Quality management system
- ISO 14001:2015: Environmental management system
- ISO 45001:2018: Occupational health and safety management system
Special Warranties
- 20 years limited product warranty
- Limited linear power warranty: 30 years 84.45% of the nominal power
output.
355W-375W – AS-6M-CET/AS-6M-CEW
Key Features
- High module conversion efficiency up to 19.17% by using high efficient solar cells
and advanced manufacturing technology. - Lower annual power degradation and higher energy yield during the module’s
lifetime. - High load-bearing capacity which can withstand wind loads up to 2400Pa and snow
loads up to 5400Pa. - Excellent reliability and durability against extreme environmental conditions (high
resistance to salt mist, ammonia, sand, acid and alkali, etc.). - Potential induced degradation (PID) free.
- Positive power tolerance of 0 ~ +3 %.
Quality Certificates
- IEC61215, IEC61730, CE
- ISO9001:2015: Quality management system
- ISO14001:2015: Environmental management system
- OHSAS18001:2007: Occupational health and safety management system
Special Warranties
- 12 years limited product warranty.
- Limited linear power warranty: 30 years 82.5% of the nominal power output.
Other Documentation
GET YOUR FREE QUOTATION DIRECTLY FROM AMERISOLAR
